收藏ben页 您hao,欢迎纁hui絪hang海澳门威niren7983,将竭诚为您fu务!    gong作shi间:shang午 9:00 - 下午 18:00 温馨提shi:
EHS 网站
热门搜suo:
防火柜、安全柜、化学pin柜、gongye安全锁具、盛漏托盘、吸附棉套zhuang等gongye安全与环bao产pin;shiyan台、shiyan室家具、通风柜、shiyan柜等shiyan室设计规划、生产、安zhuang及配件;离xin机、防baogong具、hong箱、超声波清洗机、水质jian测仪器及shiyan蕐e牟牡裙?dalei产pin。
产pin分lei
pin牌专qu >>更多
Ultra-EverDry?应yong指nan|shang海澳门威niren7983shiyan室设备有限公司
Ultra-EverDry?应yong指nan
 
yi.Ultra-Ever Dry? SE 7.6.110 is a solvent based two part (top and bottom) coating system. It is suitable for indoor or outdoor use. The system offers superhydrophobic and superoleophobic performanceand has been shown to maintain a high level of performance
under a variety of conditions and for extended time. The system is useful for non-wetting, anti-icing, self-cleaning, anti-bacterial, and for corrosion protection.
Ultra-Ever Dry? SE 7.6.110shiyi种溶ji型涂层(表面和打底两个部分)。蕇hi糜谑夷诨蚴彝庥ong。已经zheng明其ke以在多种条件下和较长shi间内维持超强的shu水和shu油xing能。该涂层对于防潮、防结冰、自洁,**、防fu蔯hui萪u非常有yong。
 
.Ultra-Ever Dry? SE 7.6.110 yields a matte finish surface that withstands moderate abrasion. The coating is translucent white in appearance depending on thickness used. Ultra-Ever Dry? SE 7.6.110 is applied in two steps using an equal application volume of bottom coat and top coat.
Ultra-Ever Dry? SE 7.6.110 ?SE产生yi个哑光表面ke以承受shidu的摩ca。涂层材料呈半透明白se白se的浓du则取决于喷涂厚du。Ultra-Ever Dry? SE 7.6.110 ?SE喷涂作ye分两个步骤yong相同量的打底层和表面yici喷涂。
 
.CAUTION: Items coated with Ultra-Ever Dry? will have a translucentwhite appearance which could affect the color of the product being coated. TEST ON AN INCONSPICUOUS AREA PRIOR TO FULLY COATING.
zhu意Ultra-Ever Dry?涂层呈半透明白seke能会影响到产pinben身的se彩。所以jian议您在使yong前在yixie不显眼的部位xian做yi下shiyan,以确定不会对您的产pinzao成影响后再使yong。
 
.Personal Protection Equipment:
个ren防护设备:
Always wear the following equipment when applying:
在施gong作襠ao讨衠ing使yong以下个ren防护设备:
Respirator - NIOSH approved half-face respirator P100 rating with organic vapor cartridge
呼吸器:NIOSH核zhun的半面罩shi带有机蒸汽滤盒的呼吸器P100
Safety glasses/goggles
安全眼睛/护目镜
Nitrile gloves
丁腈shou套
 
.Application Equipment Options:
施gong设备选项:
Option A: Pneumatic Sprayer
?选项A:qi动喷雾器
Air compressor
空压机
Conventional gravity fed, pneumatic sprayer, requires two separate sprayers
常规的自动给料qi动喷雾器,需要两ba单独的喷雾器
Note: Remove the pre-installed filters in the sprayer head
zhu意: 拔chu喷雾器头shang预zhuang的过滤嘴
Air pressure = 20-35 psi (138-241 kPa) nozzle
qi压=20-35psi(138-241kpa)喷嘴
Tip size = 0.020-0.050 inches (0.50-1.27 mm)
顶端尺寸=0.020-0.050英寸(0.5-1.27mm
 
Option B: Pump Sprayer
?选项B:qi压shi喷雾器
Two hand pump sprayers, one for top coat and one for bottom coat.
两个shou动qi压喷雾器,yi个yong于打底涂层、yi个yong于表面涂层
Pumps must be compatible with solvent in coating.
qi压喷雾器必须shi合于溶jilei涂料
Xylene for bottom coat and Acetone for top coat.
打底涂层含有二jiaben,表面涂层含有丙酮。
Adjustable tip size to provide fine mist.
ke调节的喷嘴ke以提供*shi合的厚du
 
Option C: Trigger Sprayer
?选项C:扳机shi喷雾器
Two trigger sprayers, one for top coat and one for bottom coat. Usually available in quart (950 mL) sizes.
两个扳机shi喷雾器,分别yong于打底和表面涂层。通常ke提供1夸脱(950 毫sheng)容积da小。
Pumps must be compatible with solvent in coating.
扳机shi喷雾器必须蕇hi糜谌躩ilei涂料。
Adjustable tip size to provide fine mist.
ke调节的喷嘴ke以提供*shi合的厚du
 
.Optional Equipments
?附件设备
Heat gun or blow dryer to speed up drying process.
热风枪或者chui风机yong于jia速干燥过程
Xylene for cleaning     
二jiaben清洗
Spreading Rate (coverage):
涂布率:
150-180 sq ft/gal (3.68-4.42 m2/L)
150-180平fang英尺/jia仑3.68-4.42平fang米/sheng
 
.Application:
应yong
Surface Preparation: Remove all oil, grease, dust, dirt, loose rust, and other foreign materials to ensure adequate adhesion of bottom coat. Sanding of the surface with 150 grit silicon carbide sand paper can enhance surface adhesion.
表面chuli:去chu所有的油、油脂、灰尘、污垢、shu松锈层及其ta异物,以确bao打底涂层lianghao的附zhou力。如果您使yong150#砂纸打mo表面的话ke以提高表面附zhou力。
Step 1: Bottom Coat
步骤1:打底涂层
Shake the can of bottom coat well and pour into dedicated sprayer.Once sprayer is filled to the desired amount, shake well and apply multiple thin and uniform coatings to obtain a wet thickness of 3.0-5.0 mils (76-127 microns). This will form a dry film thickness of 1.0-1.5 mils (25-38 microns). Some agitation during application is recommended. Avoid over wetting or pooling. Allow 15 to 20 minutes of drying time before applying top coat. A heat gun or blow dryer may be used on low setting to speed up drying time.
yao匀打底涂层,dao入专yong喷雾器。zhuman喷雾器以后yao匀,多ci薄er均匀的喷涂到3.0-5.0 mils (76-127 microns)。当干燥后厚du会在1.0-1.5 mils (25-38 microns)。jian议在作襠ao讨胁煌;味缥砥鳌1苊夤诔笔幕肪澈退亍4虻淄坎闩缤亢笮枰却?/span>15-20分钟,待其干燥后再行表面涂层喷涂。热风枪或者chui风机ke以jia速干燥的过程,缩短gu化shi间。
Step 2: Top Coat
步骤2:表面涂层
A separate sprayer used only for top coat is required. Shake the can of top coat well and pour into sprayer. Once sprayer is filled to the desired amount, shake well and apply multiple thin coats. Do not overcoat. Use an equal volume of top coat to cover the bottom coat. Some agitation during application is recommended.
表面涂层必须使yongyi个单独喷雾器。yao匀表面涂层,dao入喷雾器。zhuman喷雾器以后yao匀,多ci薄er均匀的喷涂。不要过多的喷涂,使yong相同的量fu盖打底涂层。jian议在作襠ao讨胁欢系幕味缥砥鳌Ⅻ/span>
Avoid over wetting or pooling. The top coat will produce a translucent white appearance.
避免过于潮湿的环境和水池。表面涂层将呈xian白se半透明的外guan。
Step 3: Drying/Curing of System
步骤3:干燥/gu化fangfa
The coating will become superhydrophobic within 30 minutes of the top coat application. For best results, allow 2 hours of drying time. A heat gun or blow dryer may be used on low settingto speed up drying time.
涂层的超shu水xing能会在喷涂表面涂层以后30分钟内呈xian。*佳效果da竝an枰?/span>2个小shi的干燥shi间。如果使yong热风枪或者chui风机将jia速干燥过程,缩短gu化shi间。
Step 4: Cleanup:
步骤4:清li:
Clean tools/equipment immediately after use with xylene. Empty left over top or bottom coat into original containers.作ye后立即使yong二jiaben清ligong具/设备。剩余的表面或打底涂层dao回原容器内。
 
qi.Care and Repair:
维护与bao养:
Ultra-Ever Dry? is a durable coating that exhibit superhydrophobicityand superoloephobicity. After curing the coatings will repel water mixtures and refined oil. Cleaning of the surface should be performed using low pressure water spray. The surface
should demonstrate self cleaning properties under these conditions. Dust and dirt should rinse off easily. The surface will remain completely dry. The surface will lose it properties if treated with detergents, soap, some solvents or high pressure water.
 Due to the natural oils in the skin, excessive handling with bare hands of treated materials can cause a reduction in performance as can severe abrasion.
Ultra-Ever Dry?必须同shi使yong两种涂层fangke呈xian超shu水与超shu油特xing。当涂层wan全gu化后ke以抵抗水混合物和精炼油。qing使yong低压水喷雾来清洗表面,在低压水流的chong洗下表面将会shixian自洁。灰尘以及污垢将非常容yi被chong蟘hui簦砻娼玝ao持wan全干燥。蟘hui觠i、肥皂、某xie特别溶ji或shi高压水流将会影响涂层表面部分xing能。pi肤中含有天然油脂,故过多的徒shou接触喷涂过的表面亦ke能会因yan重mo损er致表面xing能下jiang。
 
 
 
Instructional Video available at www.UltraEverDry.com-or-Scan this QR Code with your smart phone.
 
 
也ke咨询:021-69106488

shang海澳门威niren7983j将为你fu务!

产pin链接:http://www.caisonglabs.com/s04/caisonglabs/sjml/20130308/3049448/1.html
 
Copyright? 2003-2020  shang海澳门威niren7983shiyan室设备有限公司版权所有
电话:021-69106488 021-69106624 chuan真:021-69106489 di址:shang海市松江qu广富林路658弄3簆an醋致?410室 觭hi啵?01620

沪ICP备13012389号    

沪公网安备 31011402005026号